http://bmwcklt.org/forum/

COMPRA PASTILHAS TRAVÃO
http://bmwcklt.org/forum/viewtopic.php?f=49&t=10544
Página 1 de 2

Autor:  J. Lopes [ quinta dez 26, 2013 11:10 pm ]
Assunto da Mensagem:  COMPRA PASTILHAS TRAVÃO

Seria bom colocarmos aqui uma lista de possíveis interessados em comprar pastilhas de travão. De forma a fazermos uma compra significativa, com preços muito mais atractivos, e material de qualidade, neste caso Brembo.
Eu coloco-me no topo da lista:
José Lopes

Autor:  Leonel Silva [ sexta dez 27, 2013 10:00 am ]
Assunto da Mensagem:  Re: COMPRA PASTILHAS TRAVÃO

Boa ideia.
Preciso de umas para a "Tumba".

Autor:  pbar [ sexta dez 27, 2013 5:20 pm ]
Assunto da Mensagem:  Re: COMPRA PASTILHAS TRAVÃO

Digam que referência querem e quantidades.

Procurem aqui:
http://brembopads.com/En/Pads/Pads_Cata ... earch.aspx

Autor:  Leonel Silva [ sábado dez 28, 2013 6:34 pm ]
Assunto da Mensagem:  Re: COMPRA PASTILHAS TRAVÃO

A Tumba gosta destas:

-2x 07GR62CC
-07BB28CC


Este artigo ajuda a escolher.

"There are a lot of people who know a lot about bikes, how to set them up, which components are better, and especially how to ride them. I also know that there are many often overlooked parts on a bike, one of them being brake pads. Now I know what you are thinking, "A brake pad is a brake pad right?" Well as I recently found out you are wrong. Until recently I knew nothing about brake pads, and it really didn't bother me. "If I stop, that's all I need", was my thinking. But as I have recently discovered, different brake pads make a huge difference in braking performance, and that can lead to a more enjoyable ride, more maneuverability and better race times.

I am here to share with you the information I have gathered on brake pads, hopefully you will come away knowing more about what slows you down. No one can decide for you what pads to run, but this should be a good guide, which will help you make an educated decision on what pads to you should be running.

There are 2 main types of disc brake pads: Sintered (or metallic), and Resin (or organic). Both types of pads have their pros and cons, and choosing the right pad depends on many things such as:

-Rider weight
-Weather/trail conditions
-What type of riding you will be doing
-What size rotors you run

Sintered Pads
Sintered pads are made up of hardened metallic ingredients, which are bound together with pressure and temperature.

Pros
-fade at a higher temperature than resin pads
-better performance in wet conditions
-last longer

Cons
-louder
-longer break-in time
-not as much initial bite
-heat is conducted through the caliper, not the rotor

These pads will be better if you are a heavier rider. These pads are recommended for riding in wet, muddy, or dusty conditions. They are also a lot better if you are running small rotors, or are on a long descend. Although they are more noisy, and do not have as much of an initial bite as organic pads, you will definitely notice the increased performance at the end of your run. This happens because the heat is put back through your caliper, rather than your disc where you would get brake fade. Since these pads are made of a harder compound they will last longer than resin pads, but do not buy these pads just because they last longer. Always buy the pad that will enhance your performance the best, they are cheap you can always buy more if they wear out.

Metallic Pads
Metallic Pads


Resin Pads
Resin pads are made up of fibers and organic material that are bonded together with resin.

Pros
-Quieter
-Shorter break-in period
-More initial bite
-Prevent heat buildup
-Pushes heat back into the rotor

Cons
-Wear quicker
-Not as good in wet/muddy conditions

These pads are for lighter weight riders, and riding where lots of brakes are not required, like cross country, and riding in flatter areas. One thing I really love about the organic pads, is that they have a large amount of initial grab, this is a personal preference and you may not like this. When running these pads with smaller rotors, they will "manage" the heat better, meaning your oil is less likely to boil, which would cause a loss of power. Another great thing about resin pads is that they are much quieter, I know I hate brake squeal, and I'm sure you do too. One big disadvantage of these pads is that they wear out quicker, which means more replacing, and potentially more brake bleeds. Also don't run these pads when it is muddy, wet, or even very dusty conditions. It is suggested that if you are running these pads, you occasionally sand the surface, to remove the glaze.

Resin Pads
Resin Pads


In my opinion you should run metallic pads if:
-You are heavy
-You ride downhill
-The conditions are wet, muddy, etc.

and run resin pads if:
-you are light
-Conditions are dry
-You like lots of initial grab
-Your riding is less hard on brakes i.e. dirt jump/street, XC, etc.

Although I have now recommended pads for you to use, you have to make your own choices on pads according to your riding, the above list should be considered to be a guideline, and not used as a strict rule."

Autor:  Cláudio Silva [ quinta jan 02, 2014 5:07 pm ]
Assunto da Mensagem:  Re: COMPRA PASTILHAS TRAVÃO

Boa tarde,

Estou interessado em;

2 pares front pad. ref. 07BB26 CC
1 par rear pad. ref. 07BB28 SP

Para quando é que estão a pensar fazer a encomenda?

Cumprimentos

Cláudio Silva

Autor:  pbar [ quinta jan 02, 2014 5:55 pm ]
Assunto da Mensagem:  Re: COMPRA PASTILHAS TRAVÃO

Lista de encomendas:

01 - José Lopes
-2x 07BB26SA
-2x 07BB28SP

02 - Leonel Silva
-2x 07GR62CC
-1x 07BB28CC

03 - Paulo Barroso
2x 07GR62CC
1x 07BB03 30
3x 07BB04SP
1x 07072XS
1x 07075XS

04- Claudio Silva Entregue
2x 07BB26 CC
1x 07BB28 SP

05 - João Santos
2x 07BB26SA
1x 07BB28SP

06 - Luis Carvalho Entregue
2x 07BB26SA
1x 07BB28SP

07 - Hugo Militão Entregue
1x 07BB28 SP

08 - Alex Martins Entregue
2x 07BB26 SA
1x 07BB28 SP

09 - Vitor Sabino
2x 07BB38 84
1x 07BB03 30

10 - Luis Catalino
2x 07BB26SA

10 - Gary Entregue
2x 07BB26SA
1x 07BB28SP

11 - Jorge Tavares
2x 07BB03SA
1x 07BB04SP

12 - Carlos Ferreira
1x 07BB28SP

Autor:  alexandre martins [ quinta jan 02, 2014 6:37 pm ]
Assunto da Mensagem:  Re: COMPRA PASTILHAS TRAVÃO

Boa tarde Barroso

Estou interessado!
2X 07BB26SA
1X 07BB28SP
Um abraço!!!

Autor:  Vsabino [ quinta jan 02, 2014 6:57 pm ]
Assunto da Mensagem:  Re: COMPRA PASTILHAS TRAVÃO

Boas para a minha GS1200W '13
2x 07bb38 84
1x 07bb03 30

Autor:  João Cardoso [ sexta jan 03, 2014 1:02 am ]
Assunto da Mensagem:  Re: COMPRA PASTILHAS TRAVÃO

Boa noite

Gostaria apenas de partilhar que comprei uma pastilhas "BRAKING" Made in Denmark ref. BK 794CM56, para a GS 1200 na JBS MOTOS / wwww.jbs-motos.pt por 30,22 eur, já com IVA + 15% desconto.
Falar com Jorge Ferrugem e dizer que é do BMW CKLT

Cumprimentos

João Cardoso

Autor:  obelix_xxi [ sexta jan 03, 2014 9:40 am ]
Assunto da Mensagem:  Re: COMPRA PASTILHAS TRAVÃO

Então para mim :rob: quero sff:

1x 07BB28SP

obg! :D

Autor:  Joao Luis [ sexta jan 03, 2014 12:11 pm ]
Assunto da Mensagem:  Re: COMPRA PASTILHAS TRAVÃO

Aqui a malta da minha terra também costuma comprar pastilhas em grupo, mas não é de travão.... :D :D :D :D :D :D :D

Autor:  Cláudio Silva [ sexta jan 03, 2014 12:52 pm ]
Assunto da Mensagem:  Re: COMPRA PASTILHAS TRAVÃO

LLLLLOOOOOLLLLL

Autor:  pbar [ sexta jan 03, 2014 5:10 pm ]
Assunto da Mensagem:  Re: COMPRA PASTILHAS TRAVÃO

É de aceleração... :D

Autor:  Gary [ terça jan 07, 2014 7:46 pm ]
Assunto da Mensagem:  Re: COMPRA PASTILHAS TRAVÃO

Olá,

Então pretendo para a GS 1200 GS de 2011; 2x 7BB26 e 1x 7BB28 como não sei a diferença entre elas vão as recomendadas sff.
Agradecido!

Autor:  J. Lopes [ quarta jan 08, 2014 11:25 pm ]
Assunto da Mensagem:  Re: COMPRA PASTILHAS TRAVÃO

Para mim, quero dizer, para a Grande Serva são as seguintes:
2 X 07BB26SA
2 X 07BB28Sp

Obrigado

Página 1 de 2 Os Horários são TMG [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/